Garage Door Panel Replacement
Dented or cracked sections matched and fitted — across Mountain View, Old Mountain View, Cuesta Park, Whisman, Shoreline West, Los Altos, Palo Alto, Sunnyvale.
A damaged garage door section can be replaced on its own when the door model is still made, and when it is not, a new door is the honest answer. A section is a full-width panel with its hinges, struts and rollers, and the door's tracks, springs and opener were all sized for the whole door, so the replacement has to match in weight and thickness as well as looks.
We identify the door by maker, model, thickness, window layout and color, order the matching section and swap it between the sections above and below. DASMA's advice about tracks applies here too: track and sections work together as a system. If a section is cracked at a hinge location or the door has delaminated, one new panel only buys time, and we tell you so before you spend anything.
Signs You Need Garage Door Panel Replacement
- A dent or crease from a car or bike
- A crack or split along a stile or hinge point
- The door is bowed or sags between the hinges
- Layers separating or foam showing at an edge
- A section that no longer lines up with its neighbors
- Rust or rot on the bottom section
🌉 The Mid-Century Bay Factor
On a mid-century house, the panel is a design question as well as a repair. Palo Alto's Eichler guidelines advise a simple flush door with little or no glass and strongly discourage patterned glass, and Sunnyvale's guidelines say to refinish original garage doors where possible and to keep new ones simple in detail. A section swapped on an Eichler should match the vertical-board or flush look of the rest of the door.
In townhome rows the same care applies in another way: the association often sets the door style and color, so we confirm it before ordering a section or a door.



How We Handle It
Identify the door
Maker, model, thickness, window layout and color noted, with photos of the damaged section.
Quote or advise
One exact price for the matching section, or a straight answer that the door is finished.
Swap the section
Damaged section removed, the new one fitted with its hinges, struts and rollers, and the door re-aligned.
Balance and test
The new weight re-checked against the springs, then the door cycled and the reverse tested.
Starting Prices — Garage Door Panel Replacement
- Panel Replacement. quoted on site by model and color
- Quote on site
- Diagnostic Service Call. $0 with a completed repair
- $0
Starting prices for one part or one door. What you finally pay depends on the door, the grade of hardware and how many pieces are worn, and you see that number in writing at the garage before we start.